1705A Heavy Duty Hitch Vise 6IN

DESCRIPTION

• 6” Hitch / Bench Vise with Pipe Jaws has a cast iron body and replaceable hardened steel jaws.

• The vise features parallel jaws and pipe jaws.

• Vise will mount into a 2” receiver or mount to a work bench.

• Anvil on the body of vise provides a convenient wide work surface.

• Adjustment screws allow the mounting shaft to be fit snug into the receiver.

• This best quality bench vise is designed for rugged applications and are ideal for industry, home use, and outdoor use.

HITCH MOUNTING MANUAL:

WARNING:This vise is NOT rated by Class. It is intended to fit into a 2” receiver. DO NOT EXCEED THE TW (TONGUE WEIGHT) FOR THE CLASS RECEIVER THIS VISE IS

MOUNTED INTO.

• The ATV is designed to be inserted into a 2-inch square hitch

receiver.

• Slide vise tube into receiver. If the vise tube has too much

movement, “play” within the receiver; adjust the screws (A).

Use a 5/16” hex key to make the adjustments.

o Remove the vise and evenly adjust the top two

screws to remove play up and down.

o Adjust the two side screws to remove play side to

side.

• Install and test for fit, making additional adjustments as

needed. The vise should slide into the receiver with minimal

resistance.

• Align hole in vise tube with hole in hitch receiver.

• Insert hitch pin (B) completely through receiver and vise tube.

• Install hair pin (C) through hole in hitch pin.