air souce heat pump for commercial use
Inquire Nowair souce heat pump for commercial use
KONNEN AIR SOURCE HEAT PUMP, AIR TO WATER HEAT PUMP, COMMERCIAL USE:
| * Panasonic compressor & R410a refrigerant, OR Copeland compressor and R417a refrigerant; |
| * Stainless steel 304 for all fasteners, for side covers of evaporator; |
| * Preservative oil for copper tubes and all important part of cabinet; |
| * Chinese No.1 brand “ND” shell & tube heat exchanger; |
| * Japan “Saginomiya” or “Sanhua” electronic expansion valve; |
| * “Sanhua” 4-way valve; |
| * “Schneider” AC contactor & Relay |
| * LCD controller; |
| * Delivery time: 20~25 days; |
| * Payment term: T/T 30% in advance and T/T 70% before delivery; |
| * Warranty time: 24 months after delivery. |
A. High quality components
1) Daikin flexible scroll compressor, strong and reliable, service life up to 15 years,
2) Emerson ALCO thermal expansion valve, with accurate and stable throttling performance, ensuring high COP
3) Al-Mg fan motor, and Nylon fan blades, low noise, durable, with big air volume.
4) Accurate design of the case for the fan to avoid virbration to reduce the noise largely.
B. Large heat exchanger, extracting more heat from the ambient air, with high COP and stable operation evenin low ambient temperature,
C. Special design and accurate workmanship forfixing the case with bolts and nuts, no damage to the case coating, avoiding corrosion
and rust to the case.
| A02H series (Air source heat pump water heater circulation type) | ||||||||||||||
| HW03Ps-E3 | ||||||||||||||
| Rated heating capacity | kW | 12 | ||||||||||||
| Rated input power | kW | 2.75 | ||||||||||||
| Rated input current | A | 14.05 | ||||||||||||
| Maximum input power | kW | 3.38 | ||||||||||||
| Maximum input current | A | 18.28 | ||||||||||||
| Performance coefficient(COP) | / | 4.36 | ||||||||||||
| Rated hot water output temp. | ºC | 55 | ||||||||||||
| Max. hot water output temp. | ºC | 60 | ||||||||||||
| Rated hot water produce capacity | L/H | 258 | ||||||||||||
| Power supply | 1N 220V/50Hz | |||||||||||||
| Compressor | Type | Fully closed scroll type | ||||||||||||
| Start Mode | Directly start | |||||||||||||
| Quantity | Set | 1 | ||||||||||||
| Water side heat exchanger | Type | Shell & coil(tube) heat exchanger | ||||||||||||
| Water flow | m3/h | 2.1 | ||||||||||||
| Water Pressure Drop | kPa | ≤50 | ||||||||||||
| Pipe size | DN | DN20 | ||||||||||||
| Protections | 1. High pressure and low pressure protection, 2. Anti-freezing protection, 3. High temperature protection, 4. Too big of the water temperature difference for outlet and inlet protection, 5. Overload protection, 6. Lack phase protection, 7. Reverse phase protection, etc.. |
|||||||||||||
D. Noise level in one meter ditance: 50-60dBA.
