Cemented Carbide Brazed Tips
Inquire NowCemented Carbide Brazed Tips
| IS0 Code | Grade | Density g/cm³ | Hardness HRA | TRS N/mm² | Applications recommended |
| K05 | K10UF | 14.7~14.95 | ≥93 | ≥3000 | Suitable for the finishing of cast iron and nonferrous metal. |
| YG3X | 15.0~15.2 | ≥92.5 | ≥1300 | ||
| YG3 | 15.15~15.3 | ≥91.5 | ≥1400 | ||
| K10 | YG6X | 14.7~14.85 | ≥91.7 | ≥1860 | For the finishing, semifinishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel. |
| YG6A | 14.85~15.05 | ≥92.0 | ≥1600 | ||
| K20 | YG6 | 14.85~15.05 | ≥90.5 | ≥1860 | Suitable for the roughing of cast iron alloys and also for the milling of cast alloy steel. |
| K30 | YG8 | 14.60~14.85 | ≥89.7 | ≥2060 | |
| M05 | YS8 | 13.7~14.1 | ≥92.5 | ≥1720 | It can be used for the finishing of iron based and nickel based high-temperature alloys and high-strength steel and it can also be used for the finishing of chilledcast iron, heat resistant sfainless steel, high manganese steel and bardened steel. |
| M10 | YW1 | 13.0~13.3 | ≥92.0 | ≥1600 | Suitable for the finishing and semi-finishing of stainless steel and conventional alloy steel. |
| YS2T | 14.25~14.55 | ≥91.0 | ≥2160 | ||
| YT03 | 14.75~14.95 | ≥91.5 | ≥1860 | ||
| M20 | YW2 | 12.9~13.30 | ≥91.0 | ≥1680 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs. |
| YW5 | 12.9~13.30 | ≥90.5 | ≥1680 | ||
| P10 | YT15 | 11.10~11.50 | ≥91.5 | ≥1600 | Suitable for the finishing and semi-finishing of steel and cast steel with a moderate federate and a rather high cutting speed. |
| P20 | YT14 | 11.20~11.60 | ≥91.0 | ≥1680 | Suitable for the finishing and semi-finishing of steel and cast steel with a moderate federate and YS25 is specially used for the milling of steel and cast steel. |
| YS25 | 12.80~13.20 | ≥90.5 | ≥2060 | ||
| P30 | YT5 | 12.60~13.00 | ≥90.0 | ≥1750 | Suitable for the heavy duty rough turning of steel and cast steel and cast steel under unfavorable working conditions with a big feed rate at a medium and low speed YC30S is specially used for the milling of steel and cast steel. |
| YC30S | 12.80~13.00 | ≥89.5 | ≥1600 | ||
| P40 | YC40 | 12.80~13.3 | ≥89.5 | ≥1700 | Suitable for the heavy duty rough turning of steel and cast steel and cast steel at a big feed rate and also for face milling. |
According different geological mining tools, different rock hardness, or in different parts of the geological mining tools, requiring an average WC grain and containing cobalt are also different. Other high performance material can be developed by our Doctor Chen’s Reseach team.
