Injection Packer Surface Packer
Inquire NowDescription
The Injection Packer Surface Packer is an essential tool designed for effective epoxy injection at low pressures, specifically tailored for repairing hairline to wider cracks in dry conditions. These adhesive surface packers, also known as surface packer ports, are securely adhered to the concrete surface using epoxy adhesive. Each packer is equipped with non-return nipples to prevent any backflow of epoxy, ensuring a seamless injection process. Ideal for use on dry surfaces, these packers facilitate precise and efficient crack sealing, making them a reliable choice for construction and repair professionals.
Application involves preparing the crack area, cleaning the substrate, and strategically placing adhesive packers at specified intervals to ensure optimal resin flow. The packers are designed to accommodate varying crack widths and are easy to install, providing a robust solution for structural integrity enhancement.
Specifications
| Attribute | Details |
|---|---|
| Type | Surface Packer |
| Application | Epoxy Injection for Crack Repair |
| Material | Epoxy Adhesive |
| Installation Method | Adhered to Concrete Surface |
| Spacing Recommendation | 20mm to 50mm |
Additional Information
To use the Injection Packer Surface Packer effectively, follow these application instructions:
- Identify and mark the crack area, then open the crack with a grinder.
- Clean the substrate with a wire brush at a distance of 25mm on both sides of the crack.
- Measure the crack width to determine the appropriate product for injection.
- Apply adhesive packers at 20mm spacing for standard cracks, increasing to 50mm for wider cracks.
- Ensure that the bottom opening of the packer remains clear of epoxy paste to allow proper resin flow.
- After injecting, allow adequate time for the epoxy resin to cure before removing the packers.
