MIB12G-8EGP(T)-4G-MIB
Inquire Now
8* 1000Base T(X) POE ports+ 4 Gigabit COMBO SFP ports
Advanced POE technology, Ethernet ports fully compliant with IEEE802.3AF/ IEEE802.3AT standards, provides up to max 30 Watts per port.
Wire speed forwarding capability of all ports make sure of non-blocking message forwarding.
Automatic MDI/MDI-X crossover for plug-and-play
Support redundant Ring protocol (recovery time≤20ms)
Support 802.1x authentication, VLAN, and broadcast storm suppression.
Loop detection and Port+ IP+MAC binding.
Support POE power configuring, monitoring, diagnosing and summary statistics.
Port traffic monitoring and fault event alarming
Support WEB visual interface, support SNMP management.
Support full-loaded operating temperature range -40 to 85℃.
No fan, low power consumption design.
Din rail corrugated metal casing, meet IP40 protection grade.
Industrial Level-4 design.
With or without POE power supply (optional)
HENGSION Managed MIB12G-8EGP(T)-4G-MIB provides 4* Gigabit Combo ports and 8*10/100/1000BaseT(X) POE Ethernet ports. The POE Ethernet ports fully compliant with IEEE802.3af and 802.3at standards, provides up to 30Watts per port. Support redundant Ring protocol( recovery time＜20ms), with complete security and QoS policies; Support VLAN division, port mirroring, and port rate limiting; Support broadcast storm suppression, flow control, and centralized management and configuration by WEB,CLI,SNMP; POE power management and diagnosing.
MIB12G-POE series effectively reduced the cabling cost and labor costs. The wide operating temperature range and port surge protection design are ideal for application in large flow real-time outdoor environment, are widely used in industrial automation control and surveillance occasions like campus, community, rail traffic, electric power control and so on.
|
Technology |
|
|
Standards |
IEEE 802.3,802.3u,802.3x, 802.3ab, 802.3z; IEEE802.1Q,802.1p,802.1D,802.1w,802.1s,802.1X,802.1ab IEEE802.3af, IEEE802.3at |
|
Protocols |
Ring, STP/RSTP/MSTP, IGMP Snooping, VLAN, Telnet, HTTP, HTTPS, SNMPv1/v2/v3, LLDP, SNTP, SSH, FTP, QoS |
|
Interface |
|
|
Gigabit Ethernet port |
10/100/1000 Base-T(X) auto-adaptive RJ45 |
|
Gigabit Fiber port |
1000Base-X SFP port |
|
Console port |
RS232 in RJ45 connector with console cable |
|
Power supply port |
5.08 industrial terminal |
|
Switching Features |
|
|
Processing Type |
Store & forward, wire speed switching |
|
Switching bandwidth |
50Gbps |
|
Packet forwarding speed |
37.2Mpps |
|
MAC Address |
8K |
|
Buffer Memory |
512KB |
|
Priority Queue |
4 |
|
VLAN number |
4K |
|
VLAN ID |
1-4096 |
|
Multicast groups |
256 |
|
Software Features |
|
|
VLAN |
802.1Q,Vlan(4K), Port-based VLAN |
|
Storm Suppression |
Broadcast, multicast, unknown unicast storm suppression |
|
Flow control |
IEEE802.3X negotiation, CAR function, rate limiting step 64K |
|
Multicast protocol |
IGMP- Snooping |
|
Port Management |
Support port mirroring, port isolation, port trunking |
|
DHCP Management |
Support DHCP Snooping, option 82 |
|
QoS (Quality of Service) |
802.1p; Support port default priority tags, at least 4 different priority queues per port |
|
Security features |
MAC address filtering, dynamic or static MAC address learning, Loop detection and Port+ MAC binding,802.1x port authentication (Radius, Local) |
|
Traffic Management |
Port traffic monitoring and fault event alarming |
|
Management |
SNMP v1/v2/v3, CLI, WEB |
|
Management Access |
Support Console, Telnet, SSH |
|
System Maintenance |
Set system IP, restore factory settings, restart equipment, upgrade equipment |
|
File transfer |
Support Log output, configuration file backup and input |
|
LED Indicator for |
|
|
Power, Device running status, Ethernet port connection & running status, Fiber port connection & running status |
|
|
POE Features |
|
|
POE Ports |
8* 10/100/1000Base-TX POE Ethernet ports |
|
Power supply mode |
Supply power while Power Device detected |
|
Bridging mode |
Endspan (V+ corresponds to 1,2; V- corresponds to 3,6 ) |
|
AF/AT Mode |
Support IEEE802.3af/at confirmed PD, provide up to 30Watts per port. |
|
Power |
|
|
Input Voltage Range |
DC52V |
|
POE Power Consumption |
AF:15.4W/AT:30W (each port) |
|
Protection |
Overload Current Protection; Redundancy protection |
|
Mechanical |
|
|
Casing |
Strengthened corrugated metal casing |
|
Protection grade |
IP40 |
|
Dimension(L*W*H) |
129*100*77mm(h*d*w) |
|
Installation |
Din Rail |
|
Weight |
1Kg(without power supply) |
|
Environmental |
|
|
Operating Temperature |
-40℃～+85℃ |
|
Storage Temperature |
-45℃～+85℃ |
|
Relative Humidity |
5～95%,non-condensing |
|
Industry Approvals |
|
|
EMI |
FCC Part 15,CISPR(EN55022) class A |
|
EMS |
EN61000-4-2(ESD), Level 4 |
|
EN61000-4-3(RS),Level 3 |
|
|
EN61000-4-4(EFT),Level 4 |
|
|
EN61000-4-5(Surge),Level 4 |
|
|
EN61000-4-6(CS),Level 3 |
|
|
EN61000-4-8,Level 5 |
|
|
Shock |
IEC 60068-2-27 |
|
Free Fall |
IEC 60068-2-32 |
|
Vibration |
IEC 60068-2-6 |
|
Warranty |
|
|
Warranty Period |
5 years for Ethernet swtich |
|
Available Models |
Ordering Details |
|
MIB12G-8EGP-4G-MIB |
802.3AF/AT,8*100/1000M TX POE(extended to 250m)+4*1000M SFP fiber port.50Gbps,-40~85℃,not including power supply. |
|
MIB12G-8EGP-4G-EX-MIB |
802.3AF/AT,8*100/1000M TX POE(extended to 250m)+4*1000M SFP fiber port.-40~85℃,external 130W power supply(-20~70℃) |
|
MIB12G-8EGP-4G-EXI-MIB |
802.3AF/AT,8*100/1000M TX POE(extended to 250m)+4*1000M SFP fiber port.-40~85℃,external Mean Well 120W power supply(20~70℃) |
|
MIB12G-8EGPT-4G-EXI-MIB |
802.3AF/AT,4*100/1000M TX POE(extended to 250m)+2*1000M SFP fiber port.-40~85℃,external Mean Well 240W power(20~70℃) |
Package Checklist
? Ethernet switch
? Power Unit(optional)
? Hardware installation guide(printed)
? Warranty Card
