PIR Movement Sensor Light Switch
Inquire NowMotion Detector 3 Line Modular, with wide angle of detection, is suitable to use in corridors, warehouses, garages, and basements. It save energy
Specification
| Sensor type | PIR |
| Input: | 180-250V~ /50/60Hz |
| Detection face | 5-7meters |
| light intensity | 3-7 Lux |
| Max.: | 400W |
| wiring configuration | With neutral |
| connections – terminals | Screw terminal |
| type of installation | Indoor installation |
| Material: | PC |
| Color: | White, Rose Gold, Champagne, Bronze, Platinum, Luxury Gold, etc. |
| Brand: | SOK or Customized |
Instruction Of PIR Movement Sensor Light Switch
Application
This product is suitable to use in the passage at home, hotel, and office for time-delay lighting and long-lasting lighting.
Characteristic
1. Three modes for options: ON (always on), OFF (always off), PIR (Pyroelectric Infrared reacting/sensing). You can switch between different modes easily by the rod at the front plate of the product, to satisfydifferent circumstances’
2. This product is pyroelectric infrared sensorwith customized IC chip. Excellent performance against interference and high sensitivity is guaranteed.
3. When working under PIR mode, light is controlled automatically by pyroelectric infrared sensor. When people come, light will be on; when people leave, light will be off with time-delay. When the circumstance is bright enough, switch will keep the light off in order to save power.
4. Whenworking under PIR mode, if people keep moving in the sensible district, light will keep on; time-delay counts from the last sensible moving.
5. This product is with LED indicator. When the power is on, LED indicator will be on; whenthe power is off, LED indicator will be off.
Parameters
| Subject | 3 Lines | 2 Lines |
| Working Voltage | 180-250V~ 50 /60Hz | |
| Output Power | Incandescent Lamp: 0~400W
Fluorescent Lamp: 0~60VA LED Lamp: 0-40VA |
Incandescent Lamp: 5~200W
Fluorescent Lamp: 5~50VA LED Lamp: 5-30VA |
| Sensible Angle | 110° | |
| Sensible Distance | 5-7 meters (25°C) | |
| Light Sensitivity | 3-7LUX (adjustable) | |
| Time-delay | 30-260 seconds (adjustable) | |
| Dimension | 82*82*50mm | |
| Working temperature | -20~50°C | |
| Working Humidity | 10%~90%RH | |
Installation
1. Please follow the diagram below to install this product:
2. Using Instruction:
After wiring appropriately according to the above diagram, toggle to the mode which you need by the rod on the front plate.
Remove the front plate, you can see two cross groove at the back of front panel. Under PIR mode, you can adjust the lighting sensitivity and time-delay by rotating the cross. Factory setting is lowest lighting sensitivity and shortest time-delay. Please follow the instruction below to adjust:
Adjust lighting sensitivity:
Rotate the cross above the icon 
in clockwise direction to raise the lighting sensitivity, while rotate the cross in anticlockwise direction to lower the lighting sensitivity.
Adjust time-delay：
Rotate the cross above the icon 
in clockwise direction to prolong the time-delay, while rotate the cross in anticlockwise direction to shorten the time-delay.
